 Last additions - Diavel headlight film install |
390 viewsTo separate the two electrical connectors simply lift the tab (red arrow) and gently pull the male connector (what I'm holding) from the female (top) (yellow arrows). Oct 03, 2014
|
|
388 viewsTwo terminal connector comes apart just like the three terminal connector.Oct 03, 2014
|
|
With film applied.342 viewsLow beam (regular OEM bulb) and running light.Mar 15, 2014
|
|
With film applied.339 viewsRunning light on.Mar 15, 2014
|
|
With film applied.343 viewsHeadlight and running light off.Mar 15, 2014
|
|
312 viewsAdd a new zip-tie to secure the headlight cables snugly, NOT TIGHTLY. Now the headlight can be mounted to the two lower anti-vibration mounts and the acorn nuts snugged. Done!Mar 15, 2014
|
|
380 views3-pin connecter goes on next. Notice the positioning.Mar 15, 2014
|
|
387 viewsPut the electrical connectors back together. They only go on one way so it's pretty much idiot-resistant. The 2-pin goes on first. Notice the positioning.Mar 15, 2014
|
|
392 viewsThe improved squeegee in action, applying the bottom tint first.Mar 15, 2014
|
|
399 viewsMounting points.Mar 15, 2014
|
|
Side view, both lights covered373 viewsTop and bottom lights covered in lightest tint, LED not covered.Mar 15, 2014
|
|
375 viewsTo reduce scratches from the squeegee, wrap it in a semi-thick cloth. This is mine from a previous film application and is what I used after I noticed small scratches appearing on the film when I first started using the supplied one.Mar 15, 2014
|
|
Side view, half and half386 viewsLower half with lightest tint applied, LED and top have no film on them.Mar 15, 2014
|
|
Front view, both lights covered393 viewsTop and bottom tinted, LED running light not tinted.Mar 15, 2014
|
|
Front view, half and half384 viewsMy little helper showing the bottom tinted and the top untinted.Mar 15, 2014
|
|
388 viewsBoth top and bottom covered, LED uncovered. I know the bottom looks blueish but the film is the same color on top and bottom.Mar 15, 2014
|
|
396 viewsBottom covered, LED and top uncovered.Mar 15, 2014
|
|
382 viewsShows how the top and bottom parts of the headlight fairing join.Mar 15, 2014
|
|
391 viewsAll apart and ready to go! The headlight fairing is two pieces.Mar 15, 2014
|
|
392 viewsRemove these four bolts (4mm Allen) to free the headlight from the headlight fairing.Mar 15, 2014
|
|
|
|
