 Most viewed - Under-tank hose merge |
288 viewsHere's the hoses merged together. Cut the bleed hose about 6" down and insert the horizontal part of the tee. Connect the 8" hose. Done!
|
|
284 viewsI'm holding the hose that I'm going to merge and thus remove. The one near the bottom of the picture with the brass hose clamp is the hose that will remain and thus serve as the bleed and drainage line.
|
|
275 viewsThis is the drainage hose that I'm removing. I'm just going to tee it into the existing bleed hose, that's all.
|
|
270 viewsWhat you need: A barbed "T"-fitting that's 1/4" at each end. I used an 8" piece of fuel line instead of cutting the original drainage hose.
|
|
|
|
