AirCooledNut.com

Home > Zoom-zoom > How-to > Motorcycle tire vise upgrade
Mounting measurements
All measurements are from the inside boundaries.  Final measurements may slightly differ (~1/8") after bolts are tightened.  This won't affect operation.

Drilling requires a 1/2" drill bit for metal.  All of the holes in the vise parts are on the large side so there is a little bit of room for small tweaks in mounting positioning.

Mounting measurements

All measurements are from the inside boundaries. Final measurements may slightly differ (~1/8") after bolts are tightened. This won't affect operation.

Drilling requires a 1/2" drill bit for metal. All of the holes in the vise parts are on the large side so there is a little bit of room for small tweaks in mounting positioning.

20170617_125924.jpg 20170616_201351.jpg vice_measurements.jpg 20170616_201132.jpg 20170616_201118.jpg 20170616_200721.jpg 20170616_200640.jpg