 Last additions - Late model oil breather |
379 views...and finally place the spring and cap on the breather.Feb 28, 2006
|
|
396 views...then the spring rest washer...Feb 28, 2006
|
|
855 viewsDrop the metal sleeve in...Oct 16, 2005
|
|
441 viewsWhat it looks like when complete. The black paint was removed during the cleaning process.Oct 16, 2005
|
|
407 viewsClose-up of the internal pipe wrench, cam gear in the engaged position.Oct 16, 2005
|
|
453 viewsUsing an internal pipe wrench to easily and safely tighten the internal bolt that holds the breather to the mount.Oct 16, 2005
|
|
429 viewsClose-up of the internal pipe wrench, cam gear in the neutral position.Oct 16, 2005
|
|
404 viewsTop of breather showing PCV inside.Oct 16, 2005
|
|
449 viewsUnderside of breather showing PCV (positive crankcase ventilation) valve, part number 022 115 542. Again, home-made gasket between breather and white retaining nut.Oct 16, 2005
|
|
466 viewsHome-made gasket made from 1/32" rubberized gasket material from the FLAPS.Oct 16, 2005
|
|
|
|
|
|
