 Most viewed - Late model oil breather |
343 viewsUsing an internal pipe wrench to easily and safely tighten the internal bolt that holds the breather to the mount.
|
|
341 viewsWhat it looks like when complete. The black paint was removed during the cleaning process.
|
|
338 viewsHome-made gasket made from 1/32" rubberized gasket material from the FLAPS.
|
|
330 viewsUnderside of breather showing PCV (positive crankcase ventilation) valve, part number 022 115 542. Again, home-made gasket between breather and white retaining nut.
|
|
329 viewsClose-up of the internal pipe wrench, cam gear in the neutral position.
|
|
319 viewsDrop the metal sleeve in...
|
|
302 viewsClose-up of the internal pipe wrench, cam gear in the engaged position.
|
|
298 viewsTop of breather showing PCV inside.
|
|
286 views...and finally place the spring and cap on the breather.
|
|
285 views...then the spring rest washer...
|
|
|
|
|
|
