Home Login

 AirCooledNut.com
Album list Last uploads Last comments Most viewed Top rated My Favorites Search
Home > Zoom-zoom > Ducati > Hi-rise clip-ons install
Return to the thumbnail page FILE 393/428 Return to start See previous file See next file Skip to end
It seems that the locating pin on the '06 throttle clamp is 180-degrees off compared to later models. The fix was simple: Use a 5/32" drill bit and drill straight through the existing hole. Easy-peasy!

It seems that the locating pin on the '06 throttle clamp is 180-degrees off compared to later models. The fix was simple: Use a 5/32" drill bit and drill straight through the existing hole. Easy-peasy!

new_spark_plugs_011.jpg 045.JPG 5b_clear.JPG fork_protectors_016.jpg 5a_carbon.JPG 003.JPG 046.JPG
 

Powered by Coppermine Photo Gallery