 Last additions - LED front parking light |
348 viewsComparison of the incandescent bulb (left) and the LED replacement (right). Feb 23, 2011
|
|
In the raw comparison372 viewsComparison of the two bulbs. On the left is the standard incandescent and on the right is the LED unit.Feb 23, 2011
|
|
Night-time, parking lamp only334 viewsComparison of the two bulbs in the dark. On the left is the standard incandescent and on the right is the LED unit.Feb 23, 2011
|
|
Day-time, parking lamp only394 viewsComparison of the two bulbs. On the left is the standard incandescent and on the right is the LED unit.Feb 23, 2011
|
|
322 viewsThis shows where the retaining clip will rest. Simply put the top of the headlamp ring on the lip of the headlamp bucket and pivot the bottom section down. Make sure the retaining clip fits inside the bottom of the headlamp bucket and then gently push the bottom of the headlamp towards the bike body. Snug retaining screw to secure headlamp but don't over-tighten!Feb 23, 2011
|
|
316 viewsThough you can watch the video here, it's awfully big so I suggest going to my YouTube page here: http://www.youtube.com/watch?v=ozZp4sLwWhAFeb 23, 2011
|
|
325 viewsHere's the LED replacement, ready for use.Feb 23, 2011
|
|
333 viewsClose-up comparison of the incandescent bulb (left) and the LED replacement (right).Feb 23, 2011
|
|
325 viewsThe stock incandescent bulb. Boooo!Feb 23, 2011
|
|
346 viewsThe parking lamp simply pulls straight out. It's a friction-fit retention assembly.Feb 23, 2011
|
|
364 viewsThe headlamp exposed. Pretty darn simple in there.Feb 23, 2011
|
|
362 viewsUse a Phillips screwdriver to remove the retaining screw at the bottom of the headlamp. No need to completely remove the screw, just until it becomes loose & wobbly.Feb 23, 2011
|
|
Fingernails help here.340 viewsPut your fingers between the headlamp bucket and the chrome headlamp ring and pull the bottom of the headlamp out. It only needs to travel a centimeter or two for it to be free. Unhook the top and carefully lay the headlamp on the fluffy towel you placed on the fender (that's a hint).Feb 23, 2011
|
|
|
|
|
|
|
