 Last additions - Diavel headlight film install |
494 viewsTo separate the two electrical connectors simply lift the tab (red arrow) and gently pull the male connector (what I'm holding) from the female (top) (yellow arrows). Oct 03, 2014
|
|
479 viewsTwo terminal connector comes apart just like the three terminal connector.Oct 03, 2014
|
|
With film applied.449 viewsLow beam (regular OEM bulb) and running light.Mar 15, 2014
|
|
With film applied.442 viewsRunning light on.Mar 15, 2014
|
|
With film applied.427 viewsHeadlight and running light off.Mar 15, 2014
|
|
389 viewsAdd a new zip-tie to secure the headlight cables snugly, NOT TIGHTLY. Now the headlight can be mounted to the two lower anti-vibration mounts and the acorn nuts snugged. Done!Mar 15, 2014
|
|
469 views3-pin connecter goes on next. Notice the positioning.Mar 15, 2014
|
|
478 viewsPut the electrical connectors back together. They only go on one way so it's pretty much idiot-resistant. The 2-pin goes on first. Notice the positioning.Mar 15, 2014
|
|
474 viewsThe improved squeegee in action, applying the bottom tint first.Mar 15, 2014
|
|
502 viewsMounting points.Mar 15, 2014
|
|
Side view, both lights covered453 viewsTop and bottom lights covered in lightest tint, LED not covered.Mar 15, 2014
|
|
483 viewsTo reduce scratches from the squeegee, wrap it in a semi-thick cloth. This is mine from a previous film application and is what I used after I noticed small scratches appearing on the film when I first started using the supplied one.Mar 15, 2014
|
|
Side view, half and half463 viewsLower half with lightest tint applied, LED and top have no film on them.Mar 15, 2014
|
|
Front view, both lights covered485 viewsTop and bottom tinted, LED running light not tinted.Mar 15, 2014
|
|
Front view, half and half521 viewsMy little helper showing the bottom tinted and the top untinted.Mar 15, 2014
|
|
514 viewsBoth top and bottom covered, LED uncovered. I know the bottom looks blueish but the film is the same color on top and bottom.Mar 15, 2014
|
|
521 viewsBottom covered, LED and top uncovered.Mar 15, 2014
|
|
508 viewsShows how the top and bottom parts of the headlight fairing join.Mar 15, 2014
|
|
498 viewsAll apart and ready to go! The headlight fairing is two pieces.Mar 15, 2014
|
|
514 viewsRemove these four bolts (4mm Allen) to free the headlight from the headlight fairing.Mar 15, 2014
|
|
|
|
