AirCooledNut.com

Home > Zoom-zoom > Ducati > Diavel low-beam HID
Done!  I used a piece of wire sleeve tubing (that black ribbed bit) to protect the power wires from rubbing against the zip-tie and hourglass brace.  Most likely it's not necessary but while I was in there...just in case....

Done! I used a piece of wire sleeve tubing (that black ribbed bit) to protect the power wires from rubbing against the zip-tie and hourglass brace. Most likely it's not necessary but while I was in there...just in case....

IMAG1604.jpg IMAG1587.jpg IMAG1586.jpg IMAG1605.jpg IMAG1606.jpg IMAG1607.jpg IMAG1612.jpg