AirCooledNut.com

Home > Zoom-zoom > Ducati > Diavel low-beam HID
Done!  I used a piece of wire sleeve tubing (that black ribbed bit) to protect the power wires from rubbing against the zip-tie and hourglass brace.  Most likely it's not necessary but while I was in there...just in case....

Done! I used a piece of wire sleeve tubing (that black ribbed bit) to protect the power wires from rubbing against the zip-tie and hourglass brace. Most likely it's not necessary but while I was in there...just in case....

IMAG1607.jpg cable-shifter-2.jpg 001.JPG 003.JPG LED_parkinglight_compare1.jpg 022a.JPG IMAG1246.jpg