 Last additions |
1008 viewsHere is the end result of my custom work. The copper tab is fairly easy to bend so I tweaked it just a tad to fit with the OEM tab.Jul 25, 2016
|
|
1004 viewsNow, the regular install guide for the SC has you "cap off" the OEM cable. I decided to get rid of the OEM cable so I removed it from the harness. Here is the insulation removed from the OEM battery mount. I cut the big, black starter cable about 1/2" from the crimp and then re-wrapped the whole thing with the supplied heat shrink. This gave me a completely separate starter cable from the other electrical wiring.Jul 25, 2016
|
|
978 viewsRemove the OEM cables. This is the cable from the starter relay to the starter. Mine was in really good condition for having over 16,000 miles on it. Even the starter post under the cable boot was clean!Jul 25, 2016
|
|
1017 viewsThe starter relay removed. You will need to disconnect the cables first in order to remove it.Jul 25, 2016
|
|
972 viewsThe red line is the OEM cable that goes from the positive battery terminal to the top post on the starter relay.Jul 25, 2016
|
|
1003 viewsThe brown line is the OEM ground cable; it's connected to the negative terminal on the battery.Jul 25, 2016
|
|
559 viewsThis is the starter relay with the OEM cables.Jul 25, 2016
|
|
561 viewsClose-up of the OEM cable (red line) as it wraps around the front of the clutch and then to the starter post on the starter.Jul 25, 2016
|
|
The kit584 viewsHere's everything that came in the kit -- WOW! Nicely stocked with everything one would need, including zip ties, nice large gloves, and various chemicals!Jul 25, 2016
|
|
558 viewsThe OEM setup. The red line is the stock power cable that comes from the battery to the relay, down the right side of the engine, and under the engine to the starter.Jul 25, 2016
|
|
447 viewsTest fitting the youth Bilt helmet. Ronin chose this himself, a black with Day-Glo Yellow...it's even brighter in person!Apr 02, 2015
|
|
483 viewsReady to ride!Apr 02, 2015
|
|
Right side463 viewsApr 02, 2015
|
|
Left side433 viewsApr 02, 2015
|
|
Alpinestars Youth Vapor Knee Guards454 viewsFit nicely and will easily adjust to a wide variety of leg widths.Apr 02, 2015
|
|
461 viewsC'mon Dad, let's go ridin'!Apr 02, 2015
|
|
467 viewsFinal adjustments before our ride.Apr 02, 2015
|
|
457 viewsTop view of Kid's Diversion Off-Road Motorcycle Gloves. Decent knuckle protection and padding on top.Apr 02, 2015
|
|
437 viewsUnderside of glove with additional leather for increased abrasion resistance.Apr 02, 2015
|
|
478 viewsBilt Helmet, Fly Racing Youth Barricade Long Sleeve Body Armor Suit (really just an armored mesh jacket), Bilt gloves, and Alpinestars knee & shin armor.Apr 02, 2015
|
|
| 3332 files on 167 page(s) |
 |
11 | |
|
