 Last additions |
323 viewsThe PCIII-USB and the extensions completed, ready for installation!Apr 28, 2012
|
|
293 viewsThe connectors used to make a single pig-tail extension. These are known as AMP Junior Power Timer connectors (.250" or 250 connectors).Apr 28, 2012
|
|
368 viewsThis shows just how much the head lamps are angled on top. The left side has the LED array far back (towards the engine) whereas on the right side I wasn't as accurate and the LED array is about 3mm-5mm more forward (away from the engine). This clearly shows how the lip on the head lamp disburses the light. The left side is what I was originally looking for so I should've been more patient when installing the right side. Experience gained.Apr 16, 2012
|
|
339 viewsLow beams on.Apr 16, 2012
|
|
337 viewsOEM DRL on.Apr 16, 2012
|
|
299 viewsParking lights on.Apr 16, 2012
|
|
292 viewsLow beams on.Apr 16, 2012
|
|
309 viewsParking lights on.Apr 16, 2012
|
|
308 viewsApr 16, 2012
|
|
296 viewsWith low beams on. Very visible from the sides.Apr 16, 2012
|
|
317 viewsJust after sunset. At the time I took these pictures it was brighter out than what appears in the images. The LEDs are bright enough to the camera that it used a faster shutter speed, thus making the image look darker than it really is.Apr 16, 2012
|
|
307 viewsFacing into the sun, the LEDs can still be seen although they aren't as bright as dedicated OEM units found on other vehicles.Apr 16, 2012
|
|
309 viewsIn the shade.Apr 16, 2012
|
|
All done!312 viewsLights on. I took this picture with the flash to dim the LED array as they are very bright.Apr 13, 2012
|
|
302 viewsRouting the power feed wire along an existing loom.Apr 13, 2012
|
|
301 viewsThe red wire in the background is the turn signal tap while the white wire in the foreground is the feed to the DRL array.Apr 13, 2012
|
|
307 viewsJust a close-up of the power feed from the relay box tapped into the main power feed line that goes between the DRL LED array. The connector that's connecting white wire to red wire is what's feeding the DRL LED array.Apr 13, 2012
|
|
295 viewsShowing the finished wiring.Apr 13, 2012
|
|
323 viewsJust testing the left DRL LED array directly to the relay box. Used the camera flash to 'dim' the LEDs so they wouldn't wash out the picture. They are so bright that it can be seen that they are on.Apr 13, 2012
|
|
306 viewsFeed the power feed wire through the grommet and crimp on the connector. It should be snug in order to keep moisture and dust out.Apr 13, 2012
|
|
| 3332 files on 167 page(s) |
 |
22 | |
|
