 Last additions |
352 viewsNov 05, 2008
|
|
387 viewsThis picture and the next show that the corner is cut and folded onto itself. It's best to have over-lapping than a gap in the insulation.Nov 05, 2008
|
|
409 viewsNotice that I put a length of split-loom over the cable and wrapped the insulation over it. Again, the split-loom keep the cable from cutting into the insulation.Nov 05, 2008
|
|
415 viewsWhere it ends. Give or take several inches :-)Nov 05, 2008
|
|
424 viewsUse a split-seam wire loom around the e-brake cable to keep it from rubbing a groove into the insulation.Nov 05, 2008
|
|
406 views...but now it is!Nov 05, 2008
|
|
414 viewsThis next sequence shows how I insulated the loop that feeds the main cabin (as opposed to the section that feeds the driver's cabin). Put an 18" rectangle of the insulation above the duct, cut a slit, and wrap the duct that feeds the cabin. Thus, I worked backwards, insulating the right arm of the Y-duct last (if laying on your back and looking up).Nov 05, 2008
|
|
465 viewsUnder the pedal area. The section behind it isn't insulated yet...Nov 05, 2008
|
|
430 viewsMeasure the length needed to be wrapped, add 1/2" to 1" extra, and cut with ordinary scissors. The wrap I used was 16" and it worked well to wrap the circumference of the duct with a little over-lap. Put the over-lap seam down so if water should get in, it will drain out. I had 11" and 8" zip-ties so I used them together to hold the wrap. Snug it down until it just dimples the insulation; don't reef down on it and over-tighten it!Nov 05, 2008
|
|
274 viewsNov 03, 2008
|
|
283 viewsAw, he's so adorable!Nov 03, 2008
|
|
279 views"I scored with the ladies AND the candy, Daddy!"Nov 03, 2008
|
|
278 viewsRonin's first "trick or treat"!Nov 03, 2008
|
|
282 viewsLoves his suckers!Nov 03, 2008
|
|
262 viewsNov 03, 2008
|
|
274 viewsRonin just doesn't like wearing his hats the 'normal' way.Nov 03, 2008
|
|
283 viewsMinnie Mouse and Thomas the Train (Tank Engine for you Brits).Nov 03, 2008
|
|
271 viewsThe grave yard...Nov 03, 2008
|
|
274 views...and lit up. Darned point-n-shoot digital camera makes it difficult to take decent night shots.Nov 03, 2008
|
|
281 viewsNov 03, 2008
|
|
| 3332 files on 167 page(s) |
 |
55 | |
|
