 Most viewed |
398 viewsPosing with the shoes I got her.
|
|
398 viewsThis is it. Comes with pad holder and six polishing pads. It was $9 less than the 3M product and worked great. The headlights were badly pitted but not quite yellowed. I think glass covers would've been a better idea but... I used one pad per headlamp/turn signal (the whole headlight cover) then used another pad that I shared between the headlamps so for my application it was 1.5 pads per headlamp. If your covers aren't as bad then one should be fine.
|
|
398 views
|
|
397 viewsScott attempting to use his Jedi powers on Steve.
|
|
397 viewsTraveling through the snow on Hwy. 26.
|
|
397 views
|
|
397 viewsClose-up of the leg. The upper bolt screws into a nut I welded to the back of the C-channel. The bottom bolt passes all the way through and is loosely secured with a nut -- not really necessary, just used to keep the leg from wobbling forward and backward. Next time I think I'll make the legs flare out from the trailer some more to provide better stability as well as make them shorter so more weight is on them and not the rear tire. If I'm not careful I can put the trailer on one of its rear corners.
|
|
397 viewsPrototype completely coated in bright orange vinyl. Working temperature range is -60°F to 240°F. Clean with water-based solutions, 409, or denatured alcohol. Do NOT clean with petrol cleaning products (for example, acetone)!. Thanks to AccuKraft Inc. for the industrial coating (503-681-9151).
|
|
397 views
|
|
397 viewsBella singing to Mommy, and Dad and Pat with Ronin. 10.2MB
|
|
397 viewsSame shot but in black and white. Me experimenting with the digital camera.
|
|
397 viewsRonin a.k.a. Chubba-Lubba
|
|
397 views
|
|
397 views
|
|
397 viewsTiny octopus.
|
|
397 views
|
|
396 views
|
|
396 viewsStella scooter with sidecar.
|
|
396 viewsAntonette taking a picture of me and her car at the lighthouse parking lot.
|
|
396 viewsMost of the Type 3's that were next to the DDB group.
|
|
| 3332 files on 167 page(s) |
 |
85 | |
|
